How to Apply - Strip Lashes

Follow our simple, step-by-step guide to achieve stunning, voluminous lashes in minutes. Here’s how to apply your strip lashes effortlessly:



Step 1: Measure and Trim
Carefully remove the strip lash from the tray. Hold the lash up to your natural lash line to check the fit. If the lash strip is too long, trim it from the outer end to achieve the desired size. This ensures that the lash will sit comfortably and naturally along your lash line.



Tip: Always trim small sections at a time to avoid cutting too much. A well-fitting lash strip will prevent lifting and ensure a seamless blend.



Step 2: Apply Adhesive and Wait
Using our TooTone London latex-free lash glue, apply a thin and even layer of glue along the base of the strip lash. Pay special attention to the corners to make sure they are well coated for better hold. Wait for the adhesive to dry for about 30 seconds or until it becomes tacky. This step is essential for a strong, long-lasting bond.



Step 3: Attach and Secure

Once the adhesive is ready, use tweezers or your fingers to place the strip lash along your natural lash line. Start from the middle, then adjust the inner and outer corners for a perfect fit. Gently press along the lash band to secure it, making sure the lash is adhered comfortably and seamlessly to your natural lashes.



For extra security, use our TooTone London tweezers to clamp your natural lashes and the strip lash together. This helps blend the lashes and ensures a natural, lifted look.